Introducing the SolarWing: A Revolutionary Portable Solar Solution

The solar PV container is modular product in a series of products enabling full distributed energy plant deployments anywhere with enough open space to support solar PV.

Additional benefits

Direct Solar PV Operation with Diesel Generators – The Solar PV container can be equipped with an add-on Fuel Saver control system which allows it to operate directly with a single diesel generator or generator plant to achieve fuel save and making the diesel savings pay for the system and with significant CO savings at the same time.

Quick Return of Investment – This system is typically deployed to replace diesel generated electricity at a fraction of the cost, under most scenarios 25% fuel savings, in some cases more, can be achieved and the typical ROI on such a system is within 1-3 years.

Building an entire system with other ATE modules makes full renewable energy supply possible – anywhere in the field.

Product Information

EFFICIENCYPeak efficiency98%INDICATORLEDOperation Status

MODEL		MES PV100110
RATED POWER	AC Output	110kWp (200x550Wp)
RATED POWER	DC power	100kW (2x50kW)
SYSTEM	Topology	Transformerless, On-grid
DC INPUT	Nominal DC voltage	620 Vdc
	MPPT voltage range (Vmp)	250-950 Vdc
	Full load voltage range	480 – 800 Vdc
	Maximum DC voltage (Voc)	1,000 Vdc
	Minimum / Start-up voltage	250 Vdc
	Number of MPPT	6 (2×3)
	Maximum DC power per MPPT	18.33kW
AC OUTPUT	Voltage	400 Vac (L-L) / 230 Vac (L-N) (380 Vac (L-L) / 220 Vac (L-N) and 415 Vac (L-L) / 240 Vac (L-N) are optional)
	Frequency	50 / 60 ± 2 Hz.
	Phase	Three phase four wires
	Maximum output current	150A
	Power factor	0.9 leading ~ 0.9 laging (0.8 leading ~ 0.8 laging is optional)
	Total harmonic distortion	THDi 3%
	Power consumption	1400 W
PROCTECTION	Ground fault detection	Yes
	Grid monitoring	Yes
	AC short circuit and Reverse polarity	Yes
	Over / Under voltage	Yes
	Over / Under frequency	Yes
	Over current (overload)	Yes
	Active anti-islanding	Yes
	DC Surge protection	Yes
	Over temperature	Yes
MPPT efficiency	99.9 %
LCD display	PV input (Voltage, Current, Power), Bus voltage, AC (Voltage, Frequency, Current, Power), Temperature,System status, PV input mode, Power peak (Today, History), Generated energy (Today, Week, Month, Year), Total generated energy, Setting, Event log
COMMUNICATION	Communication port	RS-485/RJ45 (Internet)
INTERFACE	Protocol	MODBUS
ENVIRONMENT	Temperature	0 to 60˚C (Power draining above 50˚C)
	Relative humidity	0 – 90 % (non – condensing)
	Maximum operating altitude	2,000 m
DESIGN	Electrical Standard	IEC 61727, IEC 62116, IEC 61683
DESIGN	Wind Standard	AS/NZ1170.2:2021: Terrain Category 2 ; Maximum wind speed 24 m/s ;
SYSTEM DIMENSION	Container type	20’HQ Shipping container
	Container dimension (W x L x H) in cm	244 x 290 x 606
	System weight in kgs	9,652 kgs
	Deployed system footprint (W x L) in meters	6 x 136 meters

Contacts

Follow us

Single product

A Revolutionary Portable Solar Solution